RUSH MH 6 Wash
The RUSH MH 6 Wash is an exciting adaption of the hugely popular RUSH PAR 2 RGBW Zoom, using the same LED engine and zoom system, but additionally featuring moving head capability. The RUSH MH 6 Wash offers a fully pre-mixed color system from 12 x 10 W RGBW LEDs with a spectacular 1060 zoom. It also offers full electronic dimming, strobe effects and temperature-controlled fan cooling for quiet operation.
- Bright LED moving head wash light
- 12 x 10 W RGBW LEDs
- Single-lens wash with fully premixed color
Features:- 12 x 10 W Osram Ostar RGBW LEDs
- Single-lens wash with fully premixed color
- 2,000 lumen output
- 1060 zoom
- 32 pre-built color macros
- Temperature-controlled cooling system
- Digital display menu
- PowerCON in and through
- 3 and 5-pin DMX options
Technical Specifications:Physical Length: 290 mm (11.4 in.)
Width: 189 mm (7.4 in.)
Height: 360 mm (14.2 in.)
Weight: 7.1 kg (15.7 lbs.)
Dynamic Effects Color mixing: RGBW
Color presets: 36 color presets plus full white, color wheel effects
Electronic dimming: 0 - 100%, four dimming curve options
Strobe and pulse effects: Variable speed and action, random strobe
Electronic 'shutter' effect: Instant open and blackout
Zoom: Motorized
Pan: 540
Tilt: 200
Control and Programming Control options: DMX
DMX channels: 14
White balance control: RGB adjustment
16-bit fine control: Dimming, pan and tilt
DMX address setting: Control panel with LCD display
DMX compliance: USITT DMX512/1990
Optics Light source: 12 x 10 W RGBW Osram Ostar LEDs
Minimum LED lifetime: 50 000 hours (to >70% luminous output)
Zoom range: 10 - 60
Figure obtained under manufacturer's test conditions
Construction Color: Black
Housing: High-impact flame-retardant thermoplastic
Ingress protection rating: IP20
Connections AC power in/thru: Neutrik PowerCon
DMX data in/thru: 3-pin and 5-pin locking XLR
Electrical AC power: 100-240 V nominal, 50/60 Hz
Power supply unit: Auto-ranging electronic switch mode
Fuse: T 3.15 A
Recommended Miniature Circuit Breaker: Type D
Per IEC 60898/UL489/CSA C22.2 No. 5
Power consumption figures are typical, not maximum. Allow for +/-10% variation.
Typical Power and Current 120 V, 60 Hz: 1.3 A, 150 W, PF 0.99
230 V, 50 Hz: 0.7 A, 150 W, PF 0.94
Typical half-cycle RMS inrush current at 240 VAC: 11.3 A
Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.
Thermal Cooling: Forced air (temperature-regulated, low noise)
Maximum ambient temperature (Ta max.): 40 C (104 F)
Minimum ambient temperature (Ta min.): 0 C (32 F)
Included Items Power input cable, 6 A, 18 AWG, UL, 0.75 mm2, H05VV-F, 1.5 m (4.9 ft.), without mains plug Omega bracket for rigging clamp attachment
